Enquiry Now

Certified

ISO9001:2008

Leading Factory

Fiber Cable Assemblies.

  • Specialized Fiber Optic Cables Manufacturer Since 1995.

Enquiry Now

Certified

ISO9001:2008

Leading Factory

Fiber Cable Assemblies.

10G SFP+ DAC

The 10G SFP+ high-speed cable is a common optical device for data center rack-top cabling, which is used to connect small access switches and servers. 10G SFP+ high-speed cable is a low-cost alternative to optical modules for short-distance high-speed interconnects with low power consumption and low latency. The SFP+ optical module is a duplex LC interface that is used with LC fiber jumpers for fiber cabling. It offers a wide range of 10G Ethernet connectivity options for data center, enterprise wiring closet and service provider transmissions, typically at 850nm, 1310nm or 1550nm.

Cisco SFP-H10GB- Compatible 10G SFP+ DAC Twinax Cable (custom length, passive, SFP+ to SFP+, 30AWG)

Cisco Compatible SFP-H10GB-X Vendor Name Huihongfiber
Connector Type SFP+ to SFP+ Max Data Rate 10Gbps
Minimum Bend Radius 20mm Wire AWG 30AWG
Cable Length custom length from 1 to 10meters Jacket Material PVC(OFNR)
Temperature 0 to 70°C (32 to 158°F) Protocols 1x InfiniBand QDR, DDR, SDR, 10G Gigabit Ethernet, Fibre Channel

The 10G SFP+DAC is a copper cable with SFP+ connectors at both ends. Compared with 10G optical modules, the cost is lower. With 10G SFP+DAC, the wiring flexibility is higher, and the transmission distance can reach 10 meters. In the actual construction process. 10G SFP+DAC cabling saves connection equipment, no need to use patch panels, servers and network equipment can be directly connected to the TOR switch, which indirectly saves input costs.

The rack server and the rack switch are routed. The vertical distance between the rack server and the rack switch does not exceed the cabinet. In this case, the 10G SFP+DAC can be used for connection. When the TOR switch is connected to the network switch, if the distance is greater than 15M, multimode fiber and optical modules can be selected. OM3/OM4 LC fiber jumpers and 10G SFP+ optical modules are usually used. In other words, 10G SFP+ optical modules are more widely used in long-distance transmission.

Huihong Technologies make both the SFP+ modules and SFP+ DAC/AOC cables.

Top